This isn't a cost. It's an investment.
The figures on this page are real and we don't hide them — that's how AE operates. Treat them as planning ranges, not a site-specific quote. Your actual scope and price depend on design, site conditions, materials, and the work each written proposal includes.
When you compare proposals, compare what each includes — the scope, the materials, the exclusions, the warranty terms, and how changes are handled — not just the price tag. A lower total can reflect different scope, so ask each builder to clarify the differences.
Frameless Glass Pool Fencing in Gilbert. Specified to your deck, priced in writing.
Frameless glass pool fence installation throughout Gilbert — Seville, Agritopia, Val Vista Lakes, Power Ranch, Morrison Ranch, Layton Lakes and Whitewing. AE uses minimum 1/2-inch tempered safety glass with a permanent temper mark on every installed panel, a five-foot planning baseline for a swimming-pool barrier, and Duplex 2205 stainless core-mount spigots, with the mounting detail approved for your deck and the barrier requirements you confirm with the Town of Gilbert or the applicable AHJ built into the approved design.
- AZ ROC 211530 · 347738 · 341002 · 340966
- Arizona-built since 2005
- President, Southwest Hardscapes Association
Where we install in Gilbert
Seville, Agritopia, Val Vista Lakes, Power Ranch, Morrison Ranch, Layton Lakes and Whitewing — plus the surrounding neighborhoods. Every project is field-measured after approval and each panel is individually sized and ordered for your exact layout, so a Gilbert install is a custom-built system, not an off-the-shelf fence kit.
What a Gilbert glass fence costs
- Installed glass fencing: generally $225–$325 per linear foot.
- Gates, specialty glass systems, upgraded glass and custom hardware are quoted separately after the layout and specifications are confirmed.
- Footing work, where an approved structural detail requires it, is an add-on: typically $75–$100 per linear foot in open or new areas, or $110–$125 per linear foot where pavers, turf or similar finish must be removed and reinstalled.
- These are planning ranges, not quotes. Measured conditions, access, restoration, the approved structural detail and the signed scope control final pricing.
Want a number for your own property?
Tell us the space and we'll come back with a real range for your site — no pressure, no "call for pricing."
What we verify before hardware is specified
- The structural substrate under the fence line — slab, bond beam or engineered footing. Never pavers, sand setting bed or ABC alone.
- Whether the deck is post-tension. AE will not drill a post-tension slab without written homeowner permission plus documented tendon locating such as an appropriate scan or clear professional marking.
- Panel layout, gate placement and sightlines, measured on site.
- Many Gilbert master-planned communities run an architectural review in parallel with the town's barrier requirement.
Barrier points to confirm for your Gilbert property
- Required barrier height, confirmed with the Town of Gilbert or the applicable AHJ. AE's planning baseline is five feet.
- Vertical gap limits between panels, as confirmed for your project — a 4-inch sphere is the figure commonly cited.
- Bottom gap between glass and deck, held to the limit confirmed for your project.
- Self-closing and self-latching gate operation, with latch placement, shielding and release height confirmed for your project.
- A top edge that does not offer a handhold or foothold for climbing.
- No barrier replaces active adult supervision — always watch children around water and use layers of protection.
Common questions.
Get your Gilbert glass pool fence quoted.
Free in-person assessment, spigot spec written to your verified deck, HOA coordination scoped in writing, and an itemized written proposal.
Start My Project PlanWhy this is an investment, not a cost.
An AE backyard is engineered to add daily livability and long-term home value. We publish honest ranges and build to code with a licensed and bonded Arizona crew. AE provides project-specific workmanship and manufacturer-warranty information in the signed agreement. Website summaries are for planning only.
- Licensed, bonded & insured in Arizona. ROC 340966 (R-62) · ROC 341002 (R-3) · ROC 347738 (KA-5) · ROC 211530 (CR-21). Most Arizona contracting work valued at $1,000 or more — or requiring a permit — must be performed by a properly licensed contractor, subject to statutory exemptions. Verify the legal entity, license status, and classification with the Arizona Registrar of Contractors.
- Real ranges, itemized scope. You see materials, finishes, equipment models, and a line-item budget before you sign — not a one-line "pool — $90,000."
Plan your investment with a designer.
Five minutes, a real range, and no sales pressure. Or vet any Arizona contractor (us included) before you spend a dollar.
Related glass reading
Full published pricing, line by line.
All four pool fence materials compared.
Which system fits your run and budget.
Core-mount, bolt-down, and what each needs underneath.
The full glass division — fences, gates and railings.
What happens when spigots land on pavers.
More glass fence questions?
Spigot selection, AZ pool barrier specifics, HOA process and hardware finishes — all in the glass section of the Homeowner FAQ.