Illustrated planning concept · Final design follows field verification and approved project documents
Swim-Spa Hybrid
Swim-lane concept with integrated spa.
- Size range
- 8' x 22' to 10' x 28'
- Installed investment range
- $92,000 – $135,000
- Best for
- Lap swimmers, wellness focus, small-to-medium lots
Two pages: concept rendering, planning dimensions, option decisions, and verification checklist. No email required.
Start with this conceptAn illustrated starting point
This concept is not a permit, engineering, fabrication, appliance-cutout, code-approval, or construction drawing. Field measurements, selected manufacturer documents and listings, site and utility conditions, required qualified engineering, AHJ/HOA review, approved documents, and the signed scope control the final design. The installed investment range is for planning, not a quote.
About this design
A concrete swim-and-spa planning concept with a project-selected current system and integrated spa zone. Year-round use, current performance, heating and cover compatibility depend on selected equipment, climate, operation and approved design.
Key features
- · Project-selected swim-current system
- · Integrated spa-zone concept with therapy jets
- · Uniform lane depth with a deeper swim well; final depths from the approved design
- · Cover feasibility reviewed for the selected geometry and system
- · Resistance, jet and lighting options selected per project
Equipment & systems
- · Project-selected swim-current unit, governed by that manufacturer's current instructions
- · Circulation selected from the approved design and hydraulic calculations
- · Heating equipment selected for approved pool and spa zoning
- · Sanitation approach selected for the approved project
- · Cover system selected after geometry and manufacturer review
How this pool is planned
A narrow concrete swim lane with an integrated spa zone at one end, planned so one compact envelope serves both exercise and recovery on a lot that could not hold a full pool.
Exercise first. A swim-current system lets you swim in place in a short lane, and the spa zone at the end is used for recovery and for the months when swimming is not the point.
The narrowest envelope in the catalog, which is exactly why it fits side yards and small lots. Lane length, the spa zone position and the deck on each side are resolved together against real measured space.
Two thermal zones and a current system in one envelope. Circulation, filtration, heating, sanitation, automation and the selected swim-current unit are sized and selected from the approved design, hydraulic calculations and that manufacturer's current instructions.
This is a pool for approval purposes. Permit, barrier, gate and HOA requirements are confirmed for this address and this scope regardless of how compact the water is.
Two zones at different temperatures and a mechanical current system mean more equipment per square foot than any other compact concept. Service access is planned in from the start.
Zones and relationships this concept reserves
- ASwim lane
The clear lane the current system serves and its uniform depth strategy
- BCurrent system zone
The end where the selected swim-current unit and its requirements land
- CIntegrated spa zone
The spa seating area, its footwell and its relationship to the lane
- DDeck and access
Entry into the lane, the walking route beside it and the usable deck
- EEquipment pad and service access
Reserved pad space for two zones plus the current system, with reachable service
Finish and material decision zones
- Interior finish
- A narrow envelope shows finish texture and color clearly; evaluate both underfoot and from the deck.
- Waterline tile
- Close viewing distance in a narrow pool makes the waterline band prominent.
- Coping
- The edge used for entry and rest during a swim — texture and surface temperature both matter.
- Deck surface
- Often a tight deck on a small lot; drainage, heat and clearance all need to work in less space.
Site fit — envelope, utilities and access
- Confirm real measured space in a side yard or narrow lot, including deck width on both sides.
- Verify excavation and equipment access, which is usually the limiting factor on a narrow lot.
- Complete Arizona 811 Blue Stake marking and identify overhead lines, underground utilities and easements before excavation.
- Confirm setbacks and any HOA review, particularly where a side-yard location is proposed.
- Reserve equipment-pad space sized for two thermal zones plus the selected current system, with real service clearance.
- Set grading, drainage, finished elevations and the bond-beam relationship in the approved design.
Water system and equipment strategy
- The swim-current system is selected as a product, and its own current manufacturer's instructions govern its requirements, performance and installation.
- Pool and spa zoning, heating, circulation, filtration, sanitation and automation are sized together from the approved design and hydraulic calculations.
- Heating strategy is decided against the way you intend to use each zone through the year.
- Electrical circuits, bonding and controls for the current system and both zones are scoped by the qualified electrical trade.
- Whether a cover is pursued at all is evaluated against the approved geometry and the selected cover manufacturer's own requirements.
Lock these before ordering and construction
- Whether exercise or recovery is the primary reason for the project
- Overall concept envelope — lane length, width and depth strategy as illustrative planning ranges
- Swim-current system selection, and what its own documentation actually states about performance
- Spa zone size, seating and where it sits relative to the house
- Heating approach for two zones and how much of the year each is used
- Whether a cover is pursued at all, evaluated against the selected geometry and manufacturer requirements
- Equipment-pad location, screening and the service route to it
Verified before anything is built
- Field-measured site dimensions, property lines, setbacks and finished elevations — confirmed on site, with a survey where the specific property or AHJ requires one
- Overhead and underground utilities, easements and Arizona 811 Blue Stake marking completed before any excavation begins
- Swim-current system selection and its current manufacturer instructions, requirements and documented performance
- Pump, filter, heating, sanitation, automation and feature loads sized and selected from the approved design, hydraulic calculations and the selected manufacturer's current instructions
- Gas, electrical and structural work — scoped and performed by the qualified trades for this address and this scope, with engineering where the property or AHJ requires it
- Barrier, gate, alarm and safety planning confirmed against current requirements for this address before construction — never assumed from a concept
- Current permit, AHJ and HOA requirements for this address and this scope — confirmed in writing before construction
- Approved documents and the signed scope, which control the final geometry, depths, equipment, finishes, safety features, schedule and price
Living with it — care and seasonal notes
- Valley water is hard. Expect mineral film at the waterline and on any feature the water travels, and plan a cleaning rhythm around the finish you choose.
- A small volume with two thermal zones responds quickly to weather and use — plan an attentive routine.
- Blown dust and monsoon debris load the skimmer and filter faster in Arizona than most owners expect, especially after a storm.
- The current system is a mechanical product with its own maintenance and service requirements from its manufacturer.
Planning this pool in Arizona
- Summer heat, low humidity and wind increase water loss; top-off behavior and auto-fill planning belong in the design, not in the first August.
- A narrow side-yard envelope can sit in shade or reflected heat depending on the wall beside it; evaluate exposure on site.
- Sun and UV age coping, deck and interior finishes differently depending on exposure — surface temperature and glare are worth evaluating on your own lot.
No pool, ledge, bench, cover, gate, fence or barrier replaces active adult supervision. Designate an undistracted adult Water Watcher whenever children are in or near water.
This planning board is a concept-stage tool. It is not permit, engineering, hydraulic, electrical, gas, accessibility, barrier, code-approval, safety-inspection, or construction documentation, and nothing here is an installation instruction. Pump, filter, heating, sanitation, automation and feature loads are sized and selected from the approved design, hydraulic calculations and the selected manufacturer's current instructions. Measured site conditions, total connected load, qualified gas, electrical and structural trades as applicable, current AHJ and HOA requirements, approved documents and the signed scope control the final build.
