Skip to main content

A Day of Giving, Dec 19: Volunteer (opens in a new tab) or donate (opens in a new tab)

Arizona licensed · $1M/$2M general liabilityServing Arizona homeowners since 2005Peoria design showroomWritten, itemized project scopesProject-specific payment & warranty terms

Pool Remodel in Chandler, AZ

Reviewed by the AE Outdoor Living team · Updated Nov 20, 2026

Short answer: In Chandler, decide whether you want a new surface or a different pool layout before choosing tile. We check where the shell, coping and deck meet, then trace the barrier from the side gate to the patio door. That tells us what to draw for the city and your HOA.

Call (623) 300-2589

Which parts of my existing pool can I keep?

You can keep features that are sound, suit the new design and work with the finished elevations. We start at the pool steps. If the entry is comfortable and the steps are sound, resurfacing can change how they feel underfoot while preserving their shape. Widening a step or adding a bench calls for a different drawing and a review of the shell and plumbing.

At the waterline, we look at how the tile meets the coping, the cap you hold when you reach the pool edge. If you like the coping and want to keep it, we check how much of the old tile can come out without disturbing that edge. If both are changing, you can hold a tile sample beneath the proposed coping to see what will actually show from across the patio.

How could a new deck change the wall or gate requirements?

A new deck changes the barrier layout when it changes the height of the walking surface, the clearance under a gate or the space the gate needs to swing. We mark those points on the plan before settling on a paving thickness. An overlay on the approach side can reduce the effective height of a fence even though nobody has touched a fence post.

Chandler’s manual distinguishes the exterior enclosure from an interior barrier between the house and pool. Its current design guidance calls for an exterior height of at least six feet and allows a four-foot interior barrier. Ask the city how its provisions for older perimeter fencing apply to your property. A street-facing gate in a perimeter wall may serve a different purpose from an interior gate between the patio and pool. We trace each route, including a door from the garage. For a proposed frameless glass pool fence in Chandler, mark where the last panel meets the block wall. Chandler lists decorative iron as an exterior option. In a master-planned community with a shared block wall, ask the HOA whether you can attach a glass or iron panel to the wall or need a separate post inside the yard.

What changes the scope and cost of a Chandler remodel?

The budget depends on what you keep, what comes out and what the new work has to connect to. Ask for an itemized scope that identifies the area to be resurfaced, the length of the tile and coping runs, and the sections of deck that must come up. A short stretch of new pipe beneath a finished patio can affect several trades and the amount of paving to be reinstated.

If moving the equipment would open up a seating area, we also check the proposed pipe route, access to valves and room to lift the filter lid. If you want the entry, water depth and equipment location all changed, compare that scope with a new pool design in Chandler before paying to preserve a layout you want to replace.

Keeping the pool but changing the deck or gate? Get an instant price range, book an on-site design consultation, or call (623) 300-2589 to walk the layout with us.

Which permit and inspection questions should I settle before demolition?

Give Chandler Building Safety a marked plan and a short description of each alteration. Call out changes to the shell, underground piping, equipment connections and fencing. Chandler requires a permit to construct pool fencing. Its manual also lists a like-for-like pool heater replacement among its exemptions. A heater move with different connections needs its own determination. Licensed trades perform gas, electrical and structural work per the signed scope. Permits are per signed scope.

For permitted work, use the inspection list issued with your permit. Chandler lists a pre-plaster/final inspection and an installed-barrier inspection. If the house forms part of the interior barrier or there is no interior pool fence, the manual calls for the homeowner to be present at the pre-plaster inspection. Identify everyone who needs access before the new finish goes in. Our Chandler pool permit guide helps you organize the paperwork. If the project address is in Phoenix, see our Phoenix pool remodel page for that jurisdiction.

What should I tell you about water use?

Tell us if the autofill seems to run constantly or if you have noticed a change on your water bill. Chandler identifies sun exposure, shade and wind as factors in evaporation, and a running autofill can hide water loss. Bring any findings from a leak evaluation. Knowing whether a pipe under the deck needs attention helps you decide how much deck to keep before you choose the new surface.

Frequently asked questions

Does Chandler require a permit for a pool remodel?
It depends on the work. New pool fencing requires a permit. For resurfacing alone, give the city a description that says whether the shell, piping and barrier will stay in place. Chandler’s list of general finish-work exemptions does not specifically name pool replastering. Ask Building Safety to classify that scope before work starts.
Do I have to bring my barrier up to current guidelines?
Chandler requires residential pools to have a compliant enclosure. Whether a particular remodel calls for changes to an existing barrier depends on what is there and what you propose. Give the reviewer the gate locations, surrounding grades and any prior approval for an older wall so they can identify the work required for your property.
Can glass fencing be used as the barrier?
We can propose a glass barrier for review. Specify whether the glass will separate the patio from the pool or form part of the exterior enclosure. Include the panel supports, gate hardware, gaps and adjoining surfaces on the drawing. Ask the reviewer to confirm that the complete assembly suits that location before ordering glass.
Do I need HOA approval first?
Chandler’s manual advises getting association approval before applying to the city if your subdivision has an HOA. Ask the association what it wants to see, especially for a shared wall, a fence visible from a common path or a relocated equipment screen. Our HOA backyard approval guide can help you prepare the submission.

Sources

Ready to plan it?


ROC #340966 (R-62) · #341002 (R-3) · #347738 (KA-5) · #211530 (CR-21) · Company facts

Related guides

Keep learning before you build.